A machine vision approach to rock fragmentation analysis

Doctoral Thesis

1996

Permanent link to this Item
Authors
Journal Title
Link to Journal
Journal ISSN
Volume Title
Publisher
Publisher

University of Cape Town

License
Series
Abstract
[pp. i - iv missing] This thesis is concerned with the development of an instrument for the purpose of performing online measurement of rock size distribution using machine vision. This instrument has application in the gold mining industry where it could be used to measure the fragmentation of gold ore on a conveyor belt feed to an autogenous mill, for the purpose of controlling the mill. The gold ore can range in size from fine material (< 20mm) to very large rocks (0.5m). A machine vision approach is only capable of directly measuring the projected area of particles at the surface of the rock-stream. A volume distribution has to be estimated from this using a stereological method. These methods have been investigated previously and are typically error prone. They have not been investigated here. An investigation of lighting demonstrates that a diffuse lighting arrangement is suitable for this application. This would have two advantages: specular reflection from wet material is suppressed; and intensity values can be used to predict the orientation of the surface of the particles. A computational structure has been developed to identify and delineate rocks in an image for the purpose of measuring their areas. It is based on the human visual system in that it consists of a low-level preattentive vision stage and a higher-level stage of attention focusing. Multiscalar image processing techniques have also been integrated in order to improve the detection of rocks across a wide range of sizes. A performance advantage can be obtained in this way because all the algorithms can be better matched to the size of the objects being detected. Results have been obtained with an average true detection rate of 69 and a further close miss rate of 14 , with very few false alarms. The overall result is that the measured projected area distribution closely matches the true value for each test image.
Description

Bibliography: p. 217-223.

Reference:

Collections