Low loss microwave power combiners/dividers
| dc.contributor.advisor | Downing, B J | en_ZA |
| dc.contributor.author | Waardenburg, Thijs | en_ZA |
| dc.date.accessioned | 2014-09-22T07:51:17Z | |
| dc.date.available | 2014-09-22T07:51:17Z | |
| dc.date.issued | 1986 | en_ZA |
| dc.description | Includes bibliographical references. | en_ZA |
| dc.description.abstract | As many current applications require microwave solid state sources with output powers greater than that available from a single device a need for combining the power from these devices is required. N-way combiners/dividers may be used to achieve this. For high output powers these combiners/dividers must have a high combining efficiency. This dissertation describes various power combining techniques and essentially a power combiner/divider that is both planar and low loss is required. The planar structure is a requirement if efficient heat dissipation is to be achieved. Cylindrical resonant cavity structures give very high combining efficiencies, however, they are non planar and have narrow bandwidths. N-way planar combiners/dividers fabricated on microstrip provide the desired planar structure but due to the characteristics of microstrip are lossy. As a culmination of this work a low loss 8-way planar stripline combiner/divider was constructed that gave a peak combining efficiency of 94 percent which approaches the combining efficiency of 98 percent that was obtained with the cylindrical resonant cavity combiner. The former offers its broader bandwidth and planar structure as advantages. | en_ZA |
| dc.identifier.apacitation | Waardenburg, T. (1986). <i>Low loss microwave power combiners/dividers</i>. (Thesis). University of Cape Town ,Faculty of Engineering & the Built Environment ,Department of Electrical Engineering. Retrieved from http://hdl.handle.net/11427/7590 | en_ZA |
| dc.identifier.chicagocitation | Waardenburg, Thijs. <i>"Low loss microwave power combiners/dividers."</i> Thesis., University of Cape Town ,Faculty of Engineering & the Built Environment ,Department of Electrical Engineering, 1986. http://hdl.handle.net/11427/7590 | en_ZA |
| dc.identifier.citation | Waardenburg, T. 1986. Low loss microwave power combiners/dividers. University of Cape Town. | en_ZA |
| dc.identifier.ris | TY - Thesis / Dissertation AU - Waardenburg, Thijs AB - As many current applications require microwave solid state sources with output powers greater than that available from a single device a need for combining the power from these devices is required. N-way combiners/dividers may be used to achieve this. For high output powers these combiners/dividers must have a high combining efficiency. This dissertation describes various power combining techniques and essentially a power combiner/divider that is both planar and low loss is required. The planar structure is a requirement if efficient heat dissipation is to be achieved. Cylindrical resonant cavity structures give very high combining efficiencies, however, they are non planar and have narrow bandwidths. N-way planar combiners/dividers fabricated on microstrip provide the desired planar structure but due to the characteristics of microstrip are lossy. As a culmination of this work a low loss 8-way planar stripline combiner/divider was constructed that gave a peak combining efficiency of 94 percent which approaches the combining efficiency of 98 percent that was obtained with the cylindrical resonant cavity combiner. The former offers its broader bandwidth and planar structure as advantages. DA - 1986 DB - OpenUCT DP - University of Cape Town LK - https://open.uct.ac.za PB - University of Cape Town PY - 1986 T1 - Low loss microwave power combiners/dividers TI - Low loss microwave power combiners/dividers UR - http://hdl.handle.net/11427/7590 ER - | en_ZA |
| dc.identifier.uri | http://hdl.handle.net/11427/7590 | |
| dc.identifier.vancouvercitation | Waardenburg T. Low loss microwave power combiners/dividers. [Thesis]. University of Cape Town ,Faculty of Engineering & the Built Environment ,Department of Electrical Engineering, 1986 [cited yyyy month dd]. Available from: http://hdl.handle.net/11427/7590 | en_ZA |
| dc.language.iso | eng | en_ZA |
| dc.publisher.department | Department of Electrical Engineering | en_ZA |
| dc.publisher.faculty | Faculty of Engineering and the Built Environment | |
| dc.publisher.institution | University of Cape Town | |
| dc.subject.other | Engineering | en_ZA |
| dc.title | Low loss microwave power combiners/dividers | en_ZA |
| dc.type | Master Thesis | |
| dc.type.qualificationlevel | Masters | |
| dc.type.qualificationname | MSC | en_ZA |
| uct.type.filetype | Text | |
| uct.type.filetype | Image | |
| uct.type.publication | Research | en_ZA |
| uct.type.resource | Thesis | en_ZA |
Files
Original bundle
1 - 1 of 1
Loading...
- Name:
- thesis_ebe_1986_waardenburg_t (1).pdf
- Size:
- 2.66 MB
- Format:
- Adobe Portable Document Format
- Description: