Heat Transfer Analysis Using Thermofluid Network Models for Industrial Biomass and Utility Scale Coal-Fired Boilers
| dc.contributor.author | Rousseau, Pieter | |
| dc.contributor.author | Laubscher, Ryno | |
| dc.contributor.author | Rawlins, Brad Travis | |
| dc.date.accessioned | 2024-04-29T10:31:59Z | |
| dc.date.available | 2024-04-29T10:31:59Z | |
| dc.date.issued | 2023-02-09 | |
| dc.date.updated | 2023-02-24T14:09:39Z | |
| dc.description.abstract | Integrated whole-boiler process models are useful in the design of biomass and coal-fired boilers, and they can also be used to analyse different scenarios such as low load operation and alternate fuel firing. Whereas CFD models are typically applied to analyse the detail heat transfer phenomena in furnaces, analysis of the integrated whole-boiler performance requires one-dimensional thermofluid network models. These incorporate zero-dimensional furnace models combined with the solution of the fundamental mass, energy, and momentum balance equations for the different heat exchangers and fluid streams. This approach is not new, and there is a large amount of information available in textbooks and technical papers. However, the information is fragmented and incomplete and therefore difficult to follow and apply. The aim of this review paper is therefore to: (i) provide a review of recent literature to show how the different approaches to boiler modelling have been applied; (ii) to provide a review and clear description of the thermofluid network modelling methodology, including the simplifying assumptions and its implications; and (iii) to demonstrate the methodology by applying it to two case study boilers with different geometries, firing systems and fuels at various loads, and comparing the results to site measurements, which highlight important aspects of the methodology. The model results compare well with values obtained from site measurements and detail CFD models for full load and part load operation. The results show the importance of utilising the high particle load model for the effective emissivity and absorptivity of the flue gas and particle suspension rather than the standard model, especially in the case of a high ash fuel. It also shows that the projected method provides better results than the direct method for the furnace water wall heat transfer. | |
| dc.identifier | doi: 10.3390/en16041741 | |
| dc.identifier.apacitation | Rousseau, P., Laubscher, R., & Rawlins, B. T. (2023). Heat Transfer Analysis Using Thermofluid Network Models for Industrial Biomass and Utility Scale Coal-Fired Boilers. http://hdl.handle.net/11427/39492 | en_ZA |
| dc.identifier.chicagocitation | Rousseau, Pieter, Ryno Laubscher, and Brad Travis Rawlins "Heat Transfer Analysis Using Thermofluid Network Models for Industrial Biomass and Utility Scale Coal-Fired Boilers." (2023) http://hdl.handle.net/11427/39492 | en_ZA |
| dc.identifier.citation | Energies 16 (4): 1741 (2023) | |
| dc.identifier.ris | TY - Journal Article AU - Rousseau, Pieter AU - Laubscher, Ryno AU - Rawlins, Brad Travis AB - Integrated whole-boiler process models are useful in the design of biomass and coal-fired boilers, and they can also be used to analyse different scenarios such as low load operation and alternate fuel firing. Whereas CFD models are typically applied to analyse the detail heat transfer phenomena in furnaces, analysis of the integrated whole-boiler performance requires one-dimensional thermofluid network models. These incorporate zero-dimensional furnace models combined with the solution of the fundamental mass, energy, and momentum balance equations for the different heat exchangers and fluid streams. This approach is not new, and there is a large amount of information available in textbooks and technical papers. However, the information is fragmented and incomplete and therefore difficult to follow and apply. The aim of this review paper is therefore to: (i) provide a review of recent literature to show how the different approaches to boiler modelling have been applied; (ii) to provide a review and clear description of the thermofluid network modelling methodology, including the simplifying assumptions and its implications; and (iii) to demonstrate the methodology by applying it to two case study boilers with different geometries, firing systems and fuels at various loads, and comparing the results to site measurements, which highlight important aspects of the methodology. The model results compare well with values obtained from site measurements and detail CFD models for full load and part load operation. The results show the importance of utilising the high particle load model for the effective emissivity and absorptivity of the flue gas and particle suspension rather than the standard model, especially in the case of a high ash fuel. It also shows that the projected method provides better results than the direct method for the furnace water wall heat transfer. DA - 2023-02-09 DB - OpenUCT DP - University of Cape Town LK - https://open.uct.ac.za PY - 2023 T1 - Heat Transfer Analysis Using Thermofluid Network Models for Industrial Biomass and Utility Scale Coal-Fired Boilers TI - Heat Transfer Analysis Using Thermofluid Network Models for Industrial Biomass and Utility Scale Coal-Fired Boilers UR - http://hdl.handle.net/11427/39492 ER - | en_ZA |
| dc.identifier.uri | http://hdl.handle.net/11427/39492 | |
| dc.identifier.vancouvercitation | Rousseau P, Laubscher R, Rawlins BT. Heat Transfer Analysis Using Thermofluid Network Models for Industrial Biomass and Utility Scale Coal-Fired Boilers. 2023; http://hdl.handle.net/11427/39492. | en_ZA |
| dc.title | Heat Transfer Analysis Using Thermofluid Network Models for Industrial Biomass and Utility Scale Coal-Fired Boilers | |
| dc.type | Journal Article |