The liberation characteristics of Greenside No. 2 seam coal
| dc.contributor.advisor | Franzidis, Jean-Paul | en_ZA |
| dc.contributor.author | Harris, Martin Colquhoun | en_ZA |
| dc.date.accessioned | 2016-10-16T09:50:24Z | |
| dc.date.available | 2016-10-16T09:50:24Z | |
| dc.date.issued | 1987 | en_ZA |
| dc.description | Bibliography: pages 116-119. | en_ZA |
| dc.description.abstract | In South Africa, ever increasing quantities of fine (-0,5 mm) coal are being produced as a result of the increased use of mechanised mining methods. Very few mines beneficiate the fines; in most cases they are discarded. However the fine size of this material suggests that it should be well liberated, with the potential to produce a low ash product. This thesis forms part of an ongoing research program examining the use of flotation to beneficiate coal fines to produce a low ash product. Coal is a highly heterogeneous material, consisting of a number of both organic (maceral) and inorganic (mineral) components with different physical and technological properties. Therefore in order to evaluate and interpret flotation results, an understanding of the liberation characterist ics of both the organic and inoganic components is required. This thesis presents a liberation study on fine coal from the Greenside Colliery, a typical colliery in the Witbank Coalfield which is the most important source of South African low ash coal. The study was performed by mining a run of mine coal sample to varying degrees of fineness (from 30 % finer than 150 micron to 90 % finer than 150 micron), screening, and assessing the liberation of each size fraction. These results were compared to those obtained from a sample of naturally arising fines (thickener underflow). Liberation was assessed by float and sink analysis, and for this purpose a new technique was developed that enables rapid and accurate float and sink analysis of coal down to a few micron in size. Petrographic analyses were performed to determine the liberation of the organic coal components. | en_ZA |
| dc.identifier.apacitation | Harris, M. C. (1987). <i>The liberation characteristics of Greenside No. 2 seam coal</i>. (Thesis). University of Cape Town ,Faculty of Engineering & the Built Environment ,Department of Chemical Engineering. Retrieved from http://hdl.handle.net/11427/22158 | en_ZA |
| dc.identifier.chicagocitation | Harris, Martin Colquhoun. <i>"The liberation characteristics of Greenside No. 2 seam coal."</i> Thesis., University of Cape Town ,Faculty of Engineering & the Built Environment ,Department of Chemical Engineering, 1987. http://hdl.handle.net/11427/22158 | en_ZA |
| dc.identifier.citation | Harris, M. 1987. The liberation characteristics of Greenside No. 2 seam coal. University of Cape Town. | en_ZA |
| dc.identifier.ris | TY - Thesis / Dissertation AU - Harris, Martin Colquhoun AB - In South Africa, ever increasing quantities of fine (-0,5 mm) coal are being produced as a result of the increased use of mechanised mining methods. Very few mines beneficiate the fines; in most cases they are discarded. However the fine size of this material suggests that it should be well liberated, with the potential to produce a low ash product. This thesis forms part of an ongoing research program examining the use of flotation to beneficiate coal fines to produce a low ash product. Coal is a highly heterogeneous material, consisting of a number of both organic (maceral) and inorganic (mineral) components with different physical and technological properties. Therefore in order to evaluate and interpret flotation results, an understanding of the liberation characterist ics of both the organic and inoganic components is required. This thesis presents a liberation study on fine coal from the Greenside Colliery, a typical colliery in the Witbank Coalfield which is the most important source of South African low ash coal. The study was performed by mining a run of mine coal sample to varying degrees of fineness (from 30 % finer than 150 micron to 90 % finer than 150 micron), screening, and assessing the liberation of each size fraction. These results were compared to those obtained from a sample of naturally arising fines (thickener underflow). Liberation was assessed by float and sink analysis, and for this purpose a new technique was developed that enables rapid and accurate float and sink analysis of coal down to a few micron in size. Petrographic analyses were performed to determine the liberation of the organic coal components. DA - 1987 DB - OpenUCT DP - University of Cape Town LK - https://open.uct.ac.za PB - University of Cape Town PY - 1987 T1 - The liberation characteristics of Greenside No. 2 seam coal TI - The liberation characteristics of Greenside No. 2 seam coal UR - http://hdl.handle.net/11427/22158 ER - | en_ZA |
| dc.identifier.uri | http://hdl.handle.net/11427/22158 | |
| dc.identifier.vancouvercitation | Harris MC. The liberation characteristics of Greenside No. 2 seam coal. [Thesis]. University of Cape Town ,Faculty of Engineering & the Built Environment ,Department of Chemical Engineering, 1987 [cited yyyy month dd]. Available from: http://hdl.handle.net/11427/22158 | en_ZA |
| dc.language.iso | eng | en_ZA |
| dc.publisher.department | Department of Chemical Engineering | en_ZA |
| dc.publisher.faculty | Faculty of Engineering and the Built Environment | |
| dc.publisher.institution | University of Cape Town | |
| dc.subject.other | Coal - Research - South Africa | en_ZA |
| dc.subject.other | Coal - South Africa - Analysis | en_ZA |
| dc.subject.other | Chemical Engineering | en_ZA |
| dc.title | The liberation characteristics of Greenside No. 2 seam coal | en_ZA |
| dc.type | Master Thesis | |
| dc.type.qualificationlevel | Masters | |
| dc.type.qualificationname | MSc (Eng) | en_ZA |
| uct.type.filetype | Text | |
| uct.type.filetype | Image | |
| uct.type.publication | Research | en_ZA |
| uct.type.resource | Thesis | en_ZA |
Files
Original bundle
1 - 1 of 1
Loading...
- Name:
- thesis_ebe_1987_harris_martin_colquhoun.pdf
- Size:
- 3.2 MB
- Format:
- Adobe Portable Document Format
- Description: