Investigation of the hot deformation of sintered titanium compacts produced from direct reduction powder

Simple item page
dc.contributor.advisorKnutsen, Robert Den_ZA
dc.contributor.advisorLang, Candyen_ZA
dc.contributor.authorPetersen, Shaheedaen_ZA
dc.date.accessioned2015-01-08T19:45:30Z
dc.date.available2015-01-08T19:45:30Z
dc.date.issued2010en_ZA
dc.descriptionIncludes bibliographical references (leaves 110-111).en_ZA
dc.description.abstractThe focus of this study was the use of powder metallurgy to produce low cost titanium with comparative mechanical properties to wrought titanium. The objectives of this investigation was to produce sintered titanium compacts that represented metal made by the Direct Powder Rolling method. The critical strain (ɛC) required to induce recrystallization following deformation was determined by hot compressing wrought titanium samples. Finally sintered titanium samples were hot compressed at ɛC and the changes to the microstructure, porosity and mechanical properties was assessed.en_ZA
dc.identifier.apacitationPetersen, S. (2010). <i>Investigation of the hot deformation of sintered titanium compacts produced from direct reduction powder</i>. (Thesis). University of Cape Town ,Faculty of Engineering & the Built Environment ,Centre for Materials Engineering. Retrieved from http://hdl.handle.net/11427/11748en_ZA
dc.identifier.chicagocitationPetersen, Shaheeda. <i>"Investigation of the hot deformation of sintered titanium compacts produced from direct reduction powder."</i> Thesis., University of Cape Town ,Faculty of Engineering & the Built Environment ,Centre for Materials Engineering, 2010. http://hdl.handle.net/11427/11748en_ZA
dc.identifier.citationPetersen, S. 2010. Investigation of the hot deformation of sintered titanium compacts produced from direct reduction powder. University of Cape Town.en_ZA
dc.identifier.ris TY - Thesis / Dissertation AU - Petersen, Shaheeda AB - The focus of this study was the use of powder metallurgy to produce low cost titanium with comparative mechanical properties to wrought titanium. The objectives of this investigation was to produce sintered titanium compacts that represented metal made by the Direct Powder Rolling method. The critical strain (ɛC) required to induce recrystallization following deformation was determined by hot compressing wrought titanium samples. Finally sintered titanium samples were hot compressed at ɛC and the changes to the microstructure, porosity and mechanical properties was assessed. DA - 2010 DB - OpenUCT DP - University of Cape Town LK - https://open.uct.ac.za PB - University of Cape Town PY - 2010 T1 - Investigation of the hot deformation of sintered titanium compacts produced from direct reduction powder TI - Investigation of the hot deformation of sintered titanium compacts produced from direct reduction powder UR - http://hdl.handle.net/11427/11748 ER - en_ZA
dc.identifier.urihttp://hdl.handle.net/11427/11748
dc.identifier.vancouvercitationPetersen S. Investigation of the hot deformation of sintered titanium compacts produced from direct reduction powder. [Thesis]. University of Cape Town ,Faculty of Engineering & the Built Environment ,Centre for Materials Engineering, 2010 [cited yyyy month dd]. Available from: http://hdl.handle.net/11427/11748en_ZA
dc.language.isoengen_ZA
dc.publisher.departmentCentre for Materials Engineeringen_ZA
dc.publisher.facultyFaculty of Engineering and the Built Environment
dc.publisher.institutionUniversity of Cape Town
dc.subject.otherMaterials Engineeringen_ZA
dc.titleInvestigation of the hot deformation of sintered titanium compacts produced from direct reduction powderen_ZA
dc.typeMaster Thesis
dc.type.qualificationlevelMasters
dc.type.qualificationnameMScen_ZA
uct.type.filetypeText
uct.type.filetypeImage
uct.type.publicationResearchen_ZA
uct.type.resourceThesisen_ZA
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
thesis_ebe_2010_petersen_s.pdf
Size:
9.02 MB
Format:
Adobe Portable Document Format
Description:
Download
Collections
Masters