The effect of oxygenates on the oligomerisation of propene over zeolite ZSM-5

Simple item page
dc.contributor.advisorFletcher, Jacken_ZA
dc.contributor.authorLangford, Steven Thomasen_ZA
dc.date.accessioned2016-03-28T14:38:04Z
dc.date.available2016-03-28T14:38:04Z
dc.date.issued1993en_ZA
dc.description.abstractThe oligomerisation of alkenes such as propene and butene represents an important route to the production of environmentally clean transportation fuels. When these olefins originate from Fischer-Tropsch product streams they are often contaminated with small amounts of oxygenates such as acetic acid, ethanol, butanol, methyl-ethyl-ketone (MEK), acetone and water. Complex feeds can result in competitive reaction between the feed components and may result in observed selectivities that cannot be predicted from pure component data alone. ZSM-5 has been shown to be an excellent catalyst for alkene oligomerisation and is also active for the conversion of oxygenates. When pure oxygenates are fed over ZSM-5 at oligomerisation temperatures, acetone and MEK cause the catalyst to deactivate and the conversions are low whereas ethanol and n-butanol are completely converted and no deactivation occurs. At 250°C acetic acid undergoes a low conversion (4%) and at higher temperatures a decrease in conversion is also observed with time. The decrease in conversion of acetone has been attributed to the formation of a surface cyclic ketonic species. During acetic acid reaction dehydroxylation of the zeolite has been proposed as the cause of decreasing activity with time but this work has shown that the catalyst is regenerable and the acidity of the catalyst, as determined by ammonia TPD, remains unchanged after reaction with acetic acid. The propene oligomerisation and hexane cracking activity of ZSM-5 (Si/Al = 30) is reduced when the catalyst is exposed to oxygenates such as acetic acid, ethanol, n-butanol, MEK, acetone and water (mole fraction in feed < 0.01). In the case of all except acetic acid the activity is almost completely restored when the oxygenate is removed. Acetic acid causes irreversible loss of activity for propene oligomerisation and hexane cracking at 250°C. For MEK and acetone the activity for propene oligomerisation is restored to a greater extent (90% for acetone and 50-60% for MEK) than acetic acid but not fully. The decrease in activity for propene oligomerisation and hexane cracking at 250°C is proposed to be due to site poisoning by preferential strong adsorption of the oxygenates, especially acetic acid, onto the zeolite surface. An adsorption complex for acetic acid and the surface hydroxyls has been proposed in which the bond angles and lengths of the molecule are similar to those observed in the formation of the acetic acid dimer, consistent with the proposed strong adsorption.en_ZA
dc.identifier.apacitationLangford, S. T. (1993). <i>The effect of oxygenates on the oligomerisation of propene over zeolite ZSM-5</i>. (Thesis). University of Cape Town ,Faculty of Engineering & the Built Environment ,Department of Chemical Engineering. Retrieved from http://hdl.handle.net/11427/18297en_ZA
dc.identifier.chicagocitationLangford, Steven Thomas. <i>"The effect of oxygenates on the oligomerisation of propene over zeolite ZSM-5."</i> Thesis., University of Cape Town ,Faculty of Engineering & the Built Environment ,Department of Chemical Engineering, 1993. http://hdl.handle.net/11427/18297en_ZA
dc.identifier.citationLangford, S. 1993. The effect of oxygenates on the oligomerisation of propene over zeolite ZSM-5. University of Cape Town.en_ZA
dc.identifier.ris TY - Thesis / Dissertation AU - Langford, Steven Thomas AB - The oligomerisation of alkenes such as propene and butene represents an important route to the production of environmentally clean transportation fuels. When these olefins originate from Fischer-Tropsch product streams they are often contaminated with small amounts of oxygenates such as acetic acid, ethanol, butanol, methyl-ethyl-ketone (MEK), acetone and water. Complex feeds can result in competitive reaction between the feed components and may result in observed selectivities that cannot be predicted from pure component data alone. ZSM-5 has been shown to be an excellent catalyst for alkene oligomerisation and is also active for the conversion of oxygenates. When pure oxygenates are fed over ZSM-5 at oligomerisation temperatures, acetone and MEK cause the catalyst to deactivate and the conversions are low whereas ethanol and n-butanol are completely converted and no deactivation occurs. At 250°C acetic acid undergoes a low conversion (4%) and at higher temperatures a decrease in conversion is also observed with time. The decrease in conversion of acetone has been attributed to the formation of a surface cyclic ketonic species. During acetic acid reaction dehydroxylation of the zeolite has been proposed as the cause of decreasing activity with time but this work has shown that the catalyst is regenerable and the acidity of the catalyst, as determined by ammonia TPD, remains unchanged after reaction with acetic acid. The propene oligomerisation and hexane cracking activity of ZSM-5 (Si/Al = 30) is reduced when the catalyst is exposed to oxygenates such as acetic acid, ethanol, n-butanol, MEK, acetone and water (mole fraction in feed < 0.01). In the case of all except acetic acid the activity is almost completely restored when the oxygenate is removed. Acetic acid causes irreversible loss of activity for propene oligomerisation and hexane cracking at 250°C. For MEK and acetone the activity for propene oligomerisation is restored to a greater extent (90% for acetone and 50-60% for MEK) than acetic acid but not fully. The decrease in activity for propene oligomerisation and hexane cracking at 250°C is proposed to be due to site poisoning by preferential strong adsorption of the oxygenates, especially acetic acid, onto the zeolite surface. An adsorption complex for acetic acid and the surface hydroxyls has been proposed in which the bond angles and lengths of the molecule are similar to those observed in the formation of the acetic acid dimer, consistent with the proposed strong adsorption. DA - 1993 DB - OpenUCT DP - University of Cape Town LK - https://open.uct.ac.za PB - University of Cape Town PY - 1993 T1 - The effect of oxygenates on the oligomerisation of propene over zeolite ZSM-5 TI - The effect of oxygenates on the oligomerisation of propene over zeolite ZSM-5 UR - http://hdl.handle.net/11427/18297 ER - en_ZA
dc.identifier.urihttp://hdl.handle.net/11427/18297
dc.identifier.vancouvercitationLangford ST. The effect of oxygenates on the oligomerisation of propene over zeolite ZSM-5. [Thesis]. University of Cape Town ,Faculty of Engineering & the Built Environment ,Department of Chemical Engineering, 1993 [cited yyyy month dd]. Available from: http://hdl.handle.net/11427/18297en_ZA
dc.language.isoengen_ZA
dc.publisher.departmentDepartment of Chemical Engineeringen_ZA
dc.publisher.facultyFaculty of Engineering and the Built Environment
dc.publisher.institutionUniversity of Cape Town
dc.subject.otherChemical Engineeringen_ZA
dc.titleThe effect of oxygenates on the oligomerisation of propene over zeolite ZSM-5en_ZA
dc.typeMaster Thesis
dc.type.qualificationlevelMasters
dc.type.qualificationnameMSc (Eng)en_ZA
uct.type.filetypeText
uct.type.filetypeImage
uct.type.publicationResearchen_ZA
uct.type.resourceThesisen_ZA
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
thesis_ebe_1993_langford_steven_thomas.pdf
Size:
2.35 MB
Format:
Adobe Portable Document Format
Description:
Download
Collections
Masters