The effect of venting configuration on the blast response of an aircraft unit load device

Kriek, Shaun

The effect of venting configuration on the blast response of an aircraft unit load device

Master Thesis

2019

Abstract

The inclusion of venting areas in aircraft unit load devices (ULDs) as a potential blast mitigation technique is investigated in this work. Damage to the ULD, such as large deflections or container rupture, from an internal explosion threatens to tear the aircraft skin and cause fuselage decompression. The loading within a luggage container was expected to be reduced when the explosive products were vented into the adjacent ULDs. Although previous work has investigated the effect of venting on ULD blast loading, this has only considered a single venting side and not multiple venting configurations. To determine if a multiple-venting system would be beneficial in ULDs, experimental blast testing was performed by subjecting a 1:6 scaled ULD box to representative blast loads with different venting configurations. The blast response of the side of the ULD which would be positioned closest to the fuselage was measured. Numerical simulations were established to provide insight into the blast loading effects not measured experimentally. The loading within the ULD box, in terms of the number and magnitude of blast wave reflections, and internal pressure build-up, was reduced when introducing venting areas. Final deformations were reduced by 11% and 22% when using a single- and double-venting configuration, respectively. Further deformation reduction was expected if more venting area was made available: unconfined blasts tests (demonstrating complete absence of ULD confinement) reduced deformations by 44%. The fully-confined (no venting) blast test resulted in rupture failure when blasted with a 20 g explosive, whereas the vented tests exhibited no tearing when blasted with higher charge masses. The double-venting configuration demonstrated better blast mitigation than the single-venting configuration. However, since both reduced the deformations and rupture probability of the container, the implementation of a multiple-venting system within aircraft ULDs would improve the survivability of the ULD container during a blast event.

Keywords

Mechanical Engineering

Reference:

Collections

Masters

Full item page