Development of a rotor model for the numerical simulation of helicopter exterior flow-fields
Thesis
2004
Permanent link to this Item
Authors
Journal Title
Link to Journal
Journal ISSN
Volume Title
Publisher
Publisher
University of Cape Town
Department
License
Series
Abstract
A numerical methodology is developed to model the effect of a rotor on the surrounding flow-field. The model calculates the time-averaged aerodynamic forces exerted on the air by the fan blades within the blade-swept region, and permits the user to specify blade properties such as cross-sectional profile and orientation at a particular radial and azimuthal location. The calculated forces are included as source terms within the Reynolds-averaged Navier-Stokes equations for an incompressible fluid, which are solved by the commercial CFD solver, FLUENT. The effects of turbulence are incorporated through the use of Launder and Spalding's k-g turbulence model. This method is selected as being the most efficient use of the resources available, giving the economic advantages of a steady simulation, while allowing radial and azimuthal variations of rotor characteristics. In order to validate the accuracy of the numerical model for both aligned and non-aligned inflow conditions, results are compared with experimental data reported for an axial flow fan. Agreement between experimental and numerical results is excellent to good. Fan static pressure rise is closely predicted by the numerical solution, while fan power consumption and fan static efficiency are under and over-predicted respectively. This error may be attributed to frictional losses not accounted for in the numerical model. These include physical rotational instabilities, leading to increased mechanical losses, and tip effects due to the clearance between the fan blade tips and the fan casing. Trends are nevertheless consistently predicted by the numerical model for inflow angles up to 45°, and for the range of blade pitch settings used. The adverse effect of off-axis inflow on the fan static pressure rise is numerically predicted, while fan power consumption is found to remain independent of inflow angle, as had been experimentally observed. The rotor model is finally integrated with the fuselage of the CIRSTEL (Combined Infra-Red Suppression and Tail rotor Elimination) prototype in an analysis of the helicopter exterior flow-field. No experimental data for this configuration was available for validation purposes. However, the model is used in the simulation of several common helicopter flight conditions. Results are presented graphically, and generally indicate good agreement with physically observed phenomena.
Description
Includes bibliographical references (leaves 84-85).
Keywords
Reference:
Hotchkiss, P. 2004. Development of a rotor model for the numerical simulation of helicopter exterior flow-fields. University of Cape Town.