Considering Specific Ion Effects on Froth Stability in Sulfidic Cu-Ni-PGM Ore Flotation
| dc.contributor.author | Manono, Malibongwe S | |
| dc.contributor.author | Corin, Kirsten C | |
| dc.date.accessioned | 2022-04-13T09:14:09Z | |
| dc.date.available | 2022-04-13T09:14:09Z | |
| dc.date.issued | 2022-03-04 | |
| dc.date.updated | 2022-03-24T14:47:08Z | |
| dc.description.abstract | The mining and mineral processing of Cu-Ni-PGM sulfide ores in South Africa occurs in semi-arid regions. The scarcity of water resources in these regions has become one of the biggest challenges faced by mineral concentrators. As a result, concentrators are forced to find ways through which they can manage and control their water usage. The recycling and re-use of process water in mineral concentration plants has therefore become a common practice. This practice is beneficial in that it reduces reliance on municipal water and harnesses compliance to stringent environmental regulations on freshwater usage. This approach also offers a better response to the Sustainable Development Goals (SDGs) for the mining industry, as water and its preservation form part of the SDGs. This practice could, however, be somewhat concerning to a process operator because recirculated water often has higher concentrations of ions compared to fresh or potable water. This is because an unintended change in the process water quality may affect critical aspects of flotation such as the stability of the froth. This issue has led to the need for both the mining industry and researchers in the field to find the ions in process water that have the greatest impact on froth stability. Thus, the authors of this study investigated the effects of various ions common in the process water of a typical Cu-Ni-PGM ore on froth stability using a 3 L bench scale flotation cell. Solids and water recoveries were used as proxies for froth stability. These were further complemented by bubble size, water recoveries, foam height, and dynamic foam stability from two-phase flotation systems. A two-phase foam study resulted in observations that supported findings from a three-phase study. Generally, single salt solutions containing Ca2+ and Mg2+ ions resulted in higher water recoveries both in the two-phase foam and three-phase froth studies, increases in foam heights and dynamic foam stability, and a decrease in bubble size compared to the solutions that contained Na+ . SO4 2− also resulted in increased foam stability compared to Cl− and NO3 −. These results showed that the divalent inorganic electrolytes—Ca2+, Mg2+ , and SO4 2−—were more froth- and foam-stabilizing than the monovalent inorganic electrolytes—Cl−, NO3 −, and Na+ . This finding was in agreement with previous research. The findings of this study are deemed crucial in the development of a process water management protocol in sulfidic Cu-Ni-PGM ore concentrators. However, more comparative three-phase froth stability tests are needed as subjects of future investigative work to further ascertain specific ion effects on froth stability in sulfide ores. | |
| dc.identifier | doi: 10.3390/min12030321 | |
| dc.identifier.apacitation | Manono, M. S., & Corin, K. C. (2022). Considering Specific Ion Effects on Froth Stability in Sulfidic Cu-Ni-PGM Ore Flotation. <i>Minerals</i>, 3 321. http://hdl.handle.net/11427/36361 | en_ZA |
| dc.identifier.chicagocitation | Manono, Malibongwe S, and Kirsten C Corin "Considering Specific Ion Effects on Froth Stability in Sulfidic Cu-Ni-PGM Ore Flotation." <i>Minerals</i> 3, (2022): 321. http://hdl.handle.net/11427/36361 | en_ZA |
| dc.identifier.citation | Manono, M.S. & Corin, K.C. 2022. Considering Specific Ion Effects on Froth Stability in Sulfidic Cu-Ni-PGM Ore Flotation. <i>Minerals.</i> 3:321. http://hdl.handle.net/11427/36361 | en_ZA |
| dc.identifier.ris | TY - Journal Article AU - Manono, Malibongwe S AU - Corin, Kirsten C AB - The mining and mineral processing of Cu-Ni-PGM sulfide ores in South Africa occurs in semi-arid regions. The scarcity of water resources in these regions has become one of the biggest challenges faced by mineral concentrators. As a result, concentrators are forced to find ways through which they can manage and control their water usage. The recycling and re-use of process water in mineral concentration plants has therefore become a common practice. This practice is beneficial in that it reduces reliance on municipal water and harnesses compliance to stringent environmental regulations on freshwater usage. This approach also offers a better response to the Sustainable Development Goals (SDGs) for the mining industry, as water and its preservation form part of the SDGs. This practice could, however, be somewhat concerning to a process operator because recirculated water often has higher concentrations of ions compared to fresh or potable water. This is because an unintended change in the process water quality may affect critical aspects of flotation such as the stability of the froth. This issue has led to the need for both the mining industry and researchers in the field to find the ions in process water that have the greatest impact on froth stability. Thus, the authors of this study investigated the effects of various ions common in the process water of a typical Cu-Ni-PGM ore on froth stability using a 3 L bench scale flotation cell. Solids and water recoveries were used as proxies for froth stability. These were further complemented by bubble size, water recoveries, foam height, and dynamic foam stability from two-phase flotation systems. A two-phase foam study resulted in observations that supported findings from a three-phase study. Generally, single salt solutions containing Ca2+ and Mg2+ ions resulted in higher water recoveries both in the two-phase foam and three-phase froth studies, increases in foam heights and dynamic foam stability, and a decrease in bubble size compared to the solutions that contained Na+ . SO4 2− also resulted in increased foam stability compared to Cl− and NO3 −. These results showed that the divalent inorganic electrolytes—Ca2+, Mg2+ , and SO4 2−—were more froth- and foam-stabilizing than the monovalent inorganic electrolytes—Cl−, NO3 −, and Na+ . This finding was in agreement with previous research. The findings of this study are deemed crucial in the development of a process water management protocol in sulfidic Cu-Ni-PGM ore concentrators. However, more comparative three-phase froth stability tests are needed as subjects of future investigative work to further ascertain specific ion effects on froth stability in sulfide ores. DA - 2022-03-04 DB - OpenUCT DP - University of Cape Town J1 - Minerals LK - https://open.uct.ac.za PY - 2022 T1 - Considering Specific Ion Effects on Froth Stability in Sulfidic Cu-Ni-PGM Ore Flotation TI - Considering Specific Ion Effects on Froth Stability in Sulfidic Cu-Ni-PGM Ore Flotation UR - http://hdl.handle.net/11427/36361 ER - | en_ZA |
| dc.identifier.uri | http://hdl.handle.net/11427/36361 | |
| dc.identifier.vancouvercitation | Manono MS, Corin KC. Considering Specific Ion Effects on Froth Stability in Sulfidic Cu-Ni-PGM Ore Flotation. Minerals. 2022;3:321. http://hdl.handle.net/11427/36361. | en_ZA |
| dc.publisher | Multidisciplinary Digital Publishing Institute | |
| dc.publisher.department | Department of Chemical Engineering | |
| dc.source | Minerals | |
| dc.source.journalvolume | 3 | |
| dc.source.journalvolume | 12 | |
| dc.source.pagination | 321 | |
| dc.source.uri | https://www.mdpi.com/journal/minerals | |
| dc.title | Considering Specific Ion Effects on Froth Stability in Sulfidic Cu-Ni-PGM Ore Flotation | |
| dc.type | Journal Article |