Using simulation and lab validation to develop a MnCO3 Recovery Process using CO2

Simple item page
dc.contributor.advisorLewis, Alison
dc.contributor.advisorChivavava, Jemitias
dc.contributor.advisorMgabhi, Senzo
dc.contributor.authorSibanda, Thabo
dc.date.accessioned2026-01-23T13:26:46Z
dc.date.available2026-01-23T13:26:46Z
dc.date.issued2025
dc.date.updated2026-01-23T12:57:56Z
dc.description.abstractManganese (Mn) is a critical metal in the production of lithium-ion battery (LiB) precursors due to its role in improving safety, stability and promoting higher efficiency and faster charging of LiBs. Battery-grade Mn or High Purity Manganese Sulphate Monohydrate (HPMSM, MnSO4·H2O), a key LiB precursor, requires low Mg and Ca content (< 0.01 wt.% each). Industrial MnSO4 pregnant leach solutions are a valuable source of HPMSM but conventional purification using electrowinning is energy-intensive, unsustainable, and environmentally harmful. Therefore, this study aimed to investigate the feasibility of chemical precipitation using a greenhouse gas (carbon dioxide gas, CO2) and ammonia (NH3) as a sustainable and cheaper alternative purification method. A high-concentration industrial MnSO4 pregnant leach solution containing at least 93.9 wt.% Mn2+, 2.23 wt.% Mg2+, and 0.14 wt.% Ca2+ was used. The results on the effect of pH from thermodynamic simulations were compared to experimental results. Experimental results investigated the effect of pH from 5.0 to 6.6 and CO2 bubbling times from 1 to 12 h using a 1.0 L semi-batch and continuously stirred glass reactor at ambient temperature and pressure. The CO2 was sparged at 0.4 L/min and the agitator speed was 500 rpm. The thermodynamic simulation predicted more than 94% Mn2+ recovery at pH > 5.0, with optimal Mn2+ selectivity at pH < 6.6. The experimental results showed optimal Mn2+ recovery of 61.3% at pH 6.6 and 8 h CO2 bubbling time, with the rejection of 57.6% Mg2+ and 46.3% Ca2+ from the MnCO3 precipitate, respectively. The discrepancy between simulation and experimental results was attributed to the slow dissolution rate of CO2. Finally, regardless of the CO2 bubbling time and pH, the washed MnCO3 precipitate contained at least 98.8% Mn, 0.15% Ca, and 0.05% Mg, meeting high-purity Mn specifications, but slightly lower than the requirements for battery grade Mn (> 99.9 wt.%, ultra-high-purity). The CO2 bubbling time and pH have a significant influence on both the recovery of Mn2+ and the rejection of Mg2+ and Ca2+. It is recommended that future work to explore the influence of pH 6.6-7.0, the effect of increasing partial pressure of CO2, and the use of nanobubbles to enhance the CO2 absorption. This study showed that carbonate precipitation using CO2 and NH3 can selectively recover Mn2+ from an industrial MnSO4 leachate containing high Mg2+ and Ca2+ impurities, offering a sustainable process with great potential for industrial application.
dc.identifier.apacitationSibanda, T. (2025). <i>Using simulation and lab validation to develop a MnCO3 Recovery Process using CO2</i>. (). University of Cape Town ,Faculty of Engineering and the Built Environment ,Department of Chemical Engineering. Retrieved from http://hdl.handle.net/11427/42672en_ZA
dc.identifier.chicagocitationSibanda, Thabo. <i>"Using simulation and lab validation to develop a MnCO3 Recovery Process using CO2."</i> ., University of Cape Town ,Faculty of Engineering and the Built Environment ,Department of Chemical Engineering, 2025. http://hdl.handle.net/11427/42672en_ZA
dc.identifier.citationSibanda, T. 2025. Using simulation and lab validation to develop a MnCO3 Recovery Process using CO2. . University of Cape Town ,Faculty of Engineering and the Built Environment ,Department of Chemical Engineering. http://hdl.handle.net/11427/42672en_ZA
dc.identifier.ris TY - Thesis / Dissertation AU - Sibanda, Thabo AB - Manganese (Mn) is a critical metal in the production of lithium-ion battery (LiB) precursors due to its role in improving safety, stability and promoting higher efficiency and faster charging of LiBs. Battery-grade Mn or High Purity Manganese Sulphate Monohydrate (HPMSM, MnSO4·H2O), a key LiB precursor, requires low Mg and Ca content (< 0.01 wt.% each). Industrial MnSO4 pregnant leach solutions are a valuable source of HPMSM but conventional purification using electrowinning is energy-intensive, unsustainable, and environmentally harmful. Therefore, this study aimed to investigate the feasibility of chemical precipitation using a greenhouse gas (carbon dioxide gas, CO2) and ammonia (NH3) as a sustainable and cheaper alternative purification method. A high-concentration industrial MnSO4 pregnant leach solution containing at least 93.9 wt.% Mn2+, 2.23 wt.% Mg2+, and 0.14 wt.% Ca2+ was used. The results on the effect of pH from thermodynamic simulations were compared to experimental results. Experimental results investigated the effect of pH from 5.0 to 6.6 and CO2 bubbling times from 1 to 12 h using a 1.0 L semi-batch and continuously stirred glass reactor at ambient temperature and pressure. The CO2 was sparged at 0.4 L/min and the agitator speed was 500 rpm. The thermodynamic simulation predicted more than 94% Mn2+ recovery at pH > 5.0, with optimal Mn2+ selectivity at pH < 6.6. The experimental results showed optimal Mn2+ recovery of 61.3% at pH 6.6 and 8 h CO2 bubbling time, with the rejection of 57.6% Mg2+ and 46.3% Ca2+ from the MnCO3 precipitate, respectively. The discrepancy between simulation and experimental results was attributed to the slow dissolution rate of CO2. Finally, regardless of the CO2 bubbling time and pH, the washed MnCO3 precipitate contained at least 98.8% Mn, 0.15% Ca, and 0.05% Mg, meeting high-purity Mn specifications, but slightly lower than the requirements for battery grade Mn (> 99.9 wt.%, ultra-high-purity). The CO2 bubbling time and pH have a significant influence on both the recovery of Mn2+ and the rejection of Mg2+ and Ca2+. It is recommended that future work to explore the influence of pH 6.6-7.0, the effect of increasing partial pressure of CO2, and the use of nanobubbles to enhance the CO2 absorption. This study showed that carbonate precipitation using CO2 and NH3 can selectively recover Mn2+ from an industrial MnSO4 leachate containing high Mg2+ and Ca2+ impurities, offering a sustainable process with great potential for industrial application. DA - 2025 DB - OpenUCT DP - University of Cape Town KW - Solubility product KW - Carbon dioxide gas KW - Manganese carbonate LK - https://open.uct.ac.za PB - University of Cape Town PY - 2025 T1 - Using simulation and lab validation to develop a MnCO3 Recovery Process using CO2 TI - Using simulation and lab validation to develop a MnCO3 Recovery Process using CO2 UR - http://hdl.handle.net/11427/42672 ER - en_ZA
dc.identifier.urihttp://hdl.handle.net/11427/42672
dc.identifier.vancouvercitationSibanda T. Using simulation and lab validation to develop a MnCO3 Recovery Process using CO2. []. University of Cape Town ,Faculty of Engineering and the Built Environment ,Department of Chemical Engineering, 2025 [cited yyyy month dd]. Available from: http://hdl.handle.net/11427/42672en_ZA
dc.language.isoen
dc.language.rfc3066eng
dc.publisher.departmentDepartment of Chemical Engineering
dc.publisher.facultyFaculty of Engineering and the Built Environment
dc.publisher.institutionUniversity of Cape Town
dc.subjectSolubility product
dc.subjectCarbon dioxide gas
dc.subjectManganese carbonate
dc.titleUsing simulation and lab validation to develop a MnCO3 Recovery Process using CO2
dc.typeThesis / Dissertation
dc.type.qualificationlevelMasters
dc.type.qualificationlevelMSc
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
thesis_ebe_2025_sibanda thabo.pdf
Size:
2.13 MB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
1.72 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Masters