A System-Wide Model for Solid Waste Separation and Food Waste Discharge to Sewer Systems

Simple item page
dc.contributor.advisorIkumi, David S
dc.contributor.advisorGaszynski, Chris
dc.contributor.authorAngula, Shalongo
dc.date.accessioned2023-02-23T09:53:11Z
dc.date.available2023-02-23T09:53:11Z
dc.date.issued2022
dc.date.updated2023-02-20T12:12:07Z
dc.description.abstractThe emergence of the circular economy, together with the changing paradigms in resource and environmental management, has resulted in a call to (1) convert wastewater treatment plants (WWTPs) to water resource recovery facilities (WRRF) and (2) diversion of organic waste (i.e., food waste) from landfills. Due to excess anaerobic digester (AD) capacities at most WWTPs, it has been proposed to co-digest sewage sludge and food waste in the AD at WWTPs to enhance resources (mainly energy and nutrient) recovery. However, suitable options for sustainable food waste handling (i.e., separation and transport) and the characteristics of food waste have not been established, particularly in South Africa. Without characterising food waste, it is impossible to include it in WWTP simulation models. In this study, food waste and sewage sludges were limited to the household food waste and primary sludge categories, respectively. A detailed review on alternative sustainable solid waste separation and food waste transport systems was carried out and a review paper was submitted to Environmental Challenges journal for publication. The experimental investigation of the study focused on identifying the biodegradable organic composition of selected substrates, i.e., primary sludge (PS), food waste, and PS and food waste blend. PS was obtained from Belville Wastewater Treatment Works (BWWTW) in Cape Town, while food waste was manually simulated. The augmented biomethane potential (ABMP) experiment was used to obtain the required research data. The ABMP data was used to determine the substrates' biodegradable composition. The biodegradable composition was carried out using two approaches. The first approach is the mass balanced bioprocess stoichiometric calculations, which used the measured start and end concentrations of the ABMP experiment. The second approach is the parameter estimation procedure, which used the mass balanced steady-state AD model of Ikumi et al. (2015) together with its built-in parameter estimation function. With the exception of methane COD produced, there were slight to moderate differences between the measured and modelled experiment results. However, the modelled experiments produced significantly higher methane COD than the measured experiment, suggesting a high-level error associated with the gas measurement. As a result, the modelled experiment and the substrates' composition obtained using parameter estimation were chosen to be more accurate and reliable. The results revealed that anaerobic digestion of food waste and co-digestion of primary sludge and food waste produces 41% and 21% more methane than the anaerobic digestion of primary sludge, respectively. The methane produced is equivalent to the potential energy recoverable. These findings suggest that diverting food waste from landfills to WWTP's AD systems can potentially enhance energy recovery. This highlights the potential need to revise urban wastewater systems to include solid waste separation and food waste diversion to AD systems to enhance resource recovery.
dc.identifier.apacitationAngula, S. (2022). <i>A System-Wide Model for Solid Waste Separation and Food Waste Discharge to Sewer Systems</i>. (). ,Faculty of Engineering and the Built Environment ,Department of Civil Engineering. Retrieved from http://hdl.handle.net/11427/37012en_ZA
dc.identifier.chicagocitationAngula, Shalongo. <i>"A System-Wide Model for Solid Waste Separation and Food Waste Discharge to Sewer Systems."</i> ., ,Faculty of Engineering and the Built Environment ,Department of Civil Engineering, 2022. http://hdl.handle.net/11427/37012en_ZA
dc.identifier.citationAngula, S. 2022. A System-Wide Model for Solid Waste Separation and Food Waste Discharge to Sewer Systems. . ,Faculty of Engineering and the Built Environment ,Department of Civil Engineering. http://hdl.handle.net/11427/37012en_ZA
dc.identifier.ris TY - Master Thesis AU - Angula, Shalongo AB - The emergence of the circular economy, together with the changing paradigms in resource and environmental management, has resulted in a call to (1) convert wastewater treatment plants (WWTPs) to water resource recovery facilities (WRRF) and (2) diversion of organic waste (i.e., food waste) from landfills. Due to excess anaerobic digester (AD) capacities at most WWTPs, it has been proposed to co-digest sewage sludge and food waste in the AD at WWTPs to enhance resources (mainly energy and nutrient) recovery. However, suitable options for sustainable food waste handling (i.e., separation and transport) and the characteristics of food waste have not been established, particularly in South Africa. Without characterising food waste, it is impossible to include it in WWTP simulation models. In this study, food waste and sewage sludges were limited to the household food waste and primary sludge categories, respectively. A detailed review on alternative sustainable solid waste separation and food waste transport systems was carried out and a review paper was submitted to Environmental Challenges journal for publication. The experimental investigation of the study focused on identifying the biodegradable organic composition of selected substrates, i.e., primary sludge (PS), food waste, and PS and food waste blend. PS was obtained from Belville Wastewater Treatment Works (BWWTW) in Cape Town, while food waste was manually simulated. The augmented biomethane potential (ABMP) experiment was used to obtain the required research data. The ABMP data was used to determine the substrates' biodegradable composition. The biodegradable composition was carried out using two approaches. The first approach is the mass balanced bioprocess stoichiometric calculations, which used the measured start and end concentrations of the ABMP experiment. The second approach is the parameter estimation procedure, which used the mass balanced steady-state AD model of Ikumi et al. (2015) together with its built-in parameter estimation function. With the exception of methane COD produced, there were slight to moderate differences between the measured and modelled experiment results. However, the modelled experiments produced significantly higher methane COD than the measured experiment, suggesting a high-level error associated with the gas measurement. As a result, the modelled experiment and the substrates' composition obtained using parameter estimation were chosen to be more accurate and reliable. The results revealed that anaerobic digestion of food waste and co-digestion of primary sludge and food waste produces 41% and 21% more methane than the anaerobic digestion of primary sludge, respectively. The methane produced is equivalent to the potential energy recoverable. These findings suggest that diverting food waste from landfills to WWTP's AD systems can potentially enhance energy recovery. This highlights the potential need to revise urban wastewater systems to include solid waste separation and food waste diversion to AD systems to enhance resource recovery. DA - 2022_ DB - OpenUCT DP - University of Cape Town KW - Civil Engineering LK - https://open.uct.ac.za PY - 2022 T1 - A System-Wide Model for Solid Waste Separation and Food Waste Discharge to Sewer Systems TI - A System-Wide Model for Solid Waste Separation and Food Waste Discharge to Sewer Systems UR - http://hdl.handle.net/11427/37012 ER - en_ZA
dc.identifier.urihttp://hdl.handle.net/11427/37012
dc.identifier.vancouvercitationAngula S. A System-Wide Model for Solid Waste Separation and Food Waste Discharge to Sewer Systems. []. ,Faculty of Engineering and the Built Environment ,Department of Civil Engineering, 2022 [cited yyyy month dd]. Available from: http://hdl.handle.net/11427/37012en_ZA
dc.language.rfc3066eng
dc.publisher.departmentDepartment of Civil Engineering
dc.publisher.facultyFaculty of Engineering and the Built Environment
dc.subjectCivil Engineering
dc.titleA System-Wide Model for Solid Waste Separation and Food Waste Discharge to Sewer Systems
dc.typeMaster Thesis
dc.type.qualificationlevelMasters
dc.type.qualificationlevelMSc
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
thesis_ebe_2022_angula shalongo.pdf
Size:
2.52 MB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
0 B
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Masters