VARPA: A Variable Power Amplifier

Thesis / Dissertation

2026

Permanent link to this Item
Authors
Journal Title
Link to Journal
Journal ISSN
Volume Title
Publisher
Publisher

University of Cape Town

License
Series
Abstract
Having the capability to vary the RF output power of a wireless transmitter has become a key requirement for users and, by extension, RF system designers. This requirement is primarily driven by external factors such as energy efficiency or RF output power constraints. Furthermore, wireless systems operating in the VHF band are of general interest for long-range, license-free telemetry, since the VHF band offers a unique set of advantages over more traditional, high-frequency bands such as UHF. These advantages include: design using discrete/lumped components and verification using low-cost RF test equipment. VHF electromagnetic propagation characteristics are also more favorable for large, open terrain, which is commonly found in rural South Africa. This dissertation will cover the research, design and verification of a 0 to 1 watt (30dBm) software adjustable RF power amplifier (PA) operating in the VHF band. The RF power amplifier design emphasizes efficiency and linearity while balancing the trade-off between power step size and system cost. To this end, a closed-loop control system is designed and implemented that uses a directional coupler and an RMS logarithmic power detector, in a feedback configuration, to allow the RF output power to be adjusted in step sizes of approximately 0.5 dB. Two power control strategies were investigated, namely: variable inline attenuation, which involves placing a variable digital attenuator at the input of the PA, as well as drain bias control which involves varying the supply voltage to the RF power amplifier itself. The resulting system consists of four distinct modules. These include the power supply module which provides the required energy to the rest of the system and regulates the PA supply voltage, the transceiver module which generates the required PA input tone, the power amplifier module which regulates the RF output power of the system, as well as an auxiliary controller module which acts as the global system coordinator. Through a high-level and detailed design and simulation stage as well as the physical construction of mixed signal PCBs, a functional system prototype was successfully developed. The prototype of the resulting system was able to achieve a PAE efficiency of 54% in class-AB mode and a large signal gain of 10.89 dB at a maximum RF output power of +30 dBm. Most importantly, the system prototype was able to set the RF output power from 0 to 30 dBm in 0.5 dB steps, with an error less than 20%, via a serial interface. The total component cost of the drain bias power control circuitry was also optimized, with a total BOM cost of less than $3 for the external power control circuit. Overall, the system was able to achieve all but one of the research and design objectives, which was a 60% PAE efficiency target due to non-ideal Q for the filtering and matching networks as well as operation below the P1dB compression point of the RF LDMOS MOSFET.
Description

Reference:

Collections