Incorporating time and statistical variations in load modelling for reliability and customer interruption costs evaluations

dc.contributor.advisorAwodele, Kehindeen_ZA
dc.contributor.authorIp Cho, Nicolas Foumg Sianen_ZA
dc.date.accessioned2016-02-08T07:03:48Z
dc.date.available2016-02-08T07:03:48Z
dc.date.issued2013en_ZA
dc.description.abstractThis study was carried out with two main objectives. Firstly to investigate different types of load modelling in reliability or CIC [customer interruption costs] evaluations to obtain an understanding on how these evaluations are performed and identifying the benefits or limitations of existing models. Secondly to develop several load modelling approaches, including a time dependent beta PDF load model, which are simulated using an appropriate simulation technique and software. A comparison using historical load data based on South African residential customers and shops (used as commercial customers) with the different load models is performed and their impact on the calculated reliability or cost indices are analysed. The analysis shows that the reliability and cost indices resulted in different values of varying degree as compared to the base case (average load model) when using reconfiguration with sufficient spare capacity.en_ZA
dc.identifier.apacitationIp Cho, N. F. S. (2013). <i>Incorporating time and statistical variations in load modelling for reliability and customer interruption costs evaluations</i>. (Thesis). University of Cape Town ,Faculty of Engineering & the Built Environment ,Department of Electrical Engineering. Retrieved from http://hdl.handle.net/11427/16830en_ZA
dc.identifier.chicagocitationIp Cho, Nicolas Foumg Sian. <i>"Incorporating time and statistical variations in load modelling for reliability and customer interruption costs evaluations."</i> Thesis., University of Cape Town ,Faculty of Engineering & the Built Environment ,Department of Electrical Engineering, 2013. http://hdl.handle.net/11427/16830en_ZA
dc.identifier.citationIp Cho, N. 2013. Incorporating time and statistical variations in load modelling for reliability and customer interruption costs evaluations. University of Cape Town.en_ZA
dc.identifier.ris TY - Thesis / Dissertation AU - Ip Cho, Nicolas Foumg Sian AB - This study was carried out with two main objectives. Firstly to investigate different types of load modelling in reliability or CIC [customer interruption costs] evaluations to obtain an understanding on how these evaluations are performed and identifying the benefits or limitations of existing models. Secondly to develop several load modelling approaches, including a time dependent beta PDF load model, which are simulated using an appropriate simulation technique and software. A comparison using historical load data based on South African residential customers and shops (used as commercial customers) with the different load models is performed and their impact on the calculated reliability or cost indices are analysed. The analysis shows that the reliability and cost indices resulted in different values of varying degree as compared to the base case (average load model) when using reconfiguration with sufficient spare capacity. DA - 2013 DB - OpenUCT DP - University of Cape Town LK - https://open.uct.ac.za PB - University of Cape Town PY - 2013 T1 - Incorporating time and statistical variations in load modelling for reliability and customer interruption costs evaluations TI - Incorporating time and statistical variations in load modelling for reliability and customer interruption costs evaluations UR - http://hdl.handle.net/11427/16830 ER - en_ZA
dc.identifier.urihttp://hdl.handle.net/11427/16830
dc.identifier.vancouvercitationIp Cho NFS. Incorporating time and statistical variations in load modelling for reliability and customer interruption costs evaluations. [Thesis]. University of Cape Town ,Faculty of Engineering & the Built Environment ,Department of Electrical Engineering, 2013 [cited yyyy month dd]. Available from: http://hdl.handle.net/11427/16830en_ZA
dc.language.isoengen_ZA
dc.publisher.departmentDepartment of Electrical Engineeringen_ZA
dc.publisher.facultyFaculty of Engineering and the Built Environment
dc.publisher.institutionUniversity of Cape Town
dc.subject.otherElectrical Engineeringen_ZA
dc.titleIncorporating time and statistical variations in load modelling for reliability and customer interruption costs evaluationsen_ZA
dc.typeMaster Thesis
dc.type.qualificationlevelMasters
dc.type.qualificationnameMScen_ZA
uct.type.filetypeText
uct.type.filetypeImage
uct.type.publicationResearchen_ZA
uct.type.resourceThesisen_ZA
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
thesis_ebe_2013_ip_cho_nicolas_foumg_sian.pdf
Size:
3.5 MB
Format:
Adobe Portable Document Format
Description:
Collections