Broadband excitation of fuel cells for online condition monitoring using different switch-mode DC-DC mode topologies
| dc.contributor.advisor | Barendse, Paul | |
| dc.contributor.author | Mahlangu, Surprise | |
| dc.date.accessioned | 2024-05-14T12:56:49Z | |
| dc.date.available | 2024-05-14T12:56:49Z | |
| dc.date.issued | 2023 | |
| dc.date.updated | 2024-05-14T12:24:05Z | |
| dc.description.abstract | There is a great demand for renewable energy sources, and these include solar and wind energy sources. However, a renewable energy source with a continuous energy supply is desired, but energy sources from wind and solar energy sources are intermittent, i.e., solar energy is only available during the day, and wind energy's availability is dependent on the season of the year and climate in the area. This, in essence, makes fuel cell systems desirable as a renewable energy source and storage in the form of green gases obtained from electrolysis or other processes using these intermittent green energy sources. Online condition monitoring of fuel cell systems without the need for additional hardware is desired in both stationery and transportation applications. Recent work has explored the use of online impedance spectroscopy for batteries using multi-sine signals through a single dc-dc converter. However, for fuel cells, the non-linearity of both the converter and the fuel cell poses a challenge to the online monitoring process. There is also a need for faster diagnostics due to the internal operating conditions of the fuel cell needing immediate control and regulation. This study demonstrates the use of the pseudo-random binary sequence (PRBS) to perform impedance spectroscopy in comparison to a single sinusoid injection. This is done to show the comparison between the two signals and to show the decrease in impedance estimation time brought about by PRBS in comparison to multi-sine signals. PRBS is a faster and easier technique to implement compared to the single-sine signals used in the condition monitoring of batteries. The tolerance of error brought by the implementation of impedance spectroscopy through PRBS and single-sine signals through a dc-dc converter is compared to the benchmarked theoretical results. This is demonstrated in simulation and experimentally. Results obtained from the Frequency Response Analyzer (FRA) are compared to the results obtained through a dc-dc converter using PRBS and Electrochemical Impedance Spectroscopy (EIS) as testing signals. Thereafter, this study demonstrates the feasibility and compares the use of the buck-boost and boost converters to perform impedance spectroscopy, and this is done by modelling and designing the converters for a linearized region of operation to accommodate different operating conditions of the fuel cell. This is achieved mainly using the double loop control strategy, which is rarely used in literature yet brings the benefits of controlling the power transfer and IS implementation. A practical buck-boost converter has discontinuous input current, more switching harmonics, and noise compared to the boost converter. As such, the contribution and influence of these factors are explored with regard to impedance estimation. The comparison of tolerance of error brought about by the implementation of impedance spectroscopy through PRBS and multi-sine signals using the boost and buck-boost converters are compared to the benchmarked theoretical results and Frequency Response Analyzer results. | |
| dc.identifier.apacitation | Mahlangu, S. (2023). <i>Broadband excitation of fuel cells for online condition monitoring using different switch-mode DC-DC mode topologies</i>. (). ,Faculty of Engineering and the Built Environment ,Department of Electrical Engineering. Retrieved from http://hdl.handle.net/11427/39614 | en_ZA |
| dc.identifier.chicagocitation | Mahlangu, Surprise. <i>"Broadband excitation of fuel cells for online condition monitoring using different switch-mode DC-DC mode topologies."</i> ., ,Faculty of Engineering and the Built Environment ,Department of Electrical Engineering, 2023. http://hdl.handle.net/11427/39614 | en_ZA |
| dc.identifier.citation | Mahlangu, S. 2023. Broadband excitation of fuel cells for online condition monitoring using different switch-mode DC-DC mode topologies. . ,Faculty of Engineering and the Built Environment ,Department of Electrical Engineering. http://hdl.handle.net/11427/39614 | en_ZA |
| dc.identifier.ris | TY - Thesis / Dissertation AU - Mahlangu, Surprise AB - There is a great demand for renewable energy sources, and these include solar and wind energy sources. However, a renewable energy source with a continuous energy supply is desired, but energy sources from wind and solar energy sources are intermittent, i.e., solar energy is only available during the day, and wind energy's availability is dependent on the season of the year and climate in the area. This, in essence, makes fuel cell systems desirable as a renewable energy source and storage in the form of green gases obtained from electrolysis or other processes using these intermittent green energy sources. Online condition monitoring of fuel cell systems without the need for additional hardware is desired in both stationery and transportation applications. Recent work has explored the use of online impedance spectroscopy for batteries using multi-sine signals through a single dc-dc converter. However, for fuel cells, the non-linearity of both the converter and the fuel cell poses a challenge to the online monitoring process. There is also a need for faster diagnostics due to the internal operating conditions of the fuel cell needing immediate control and regulation. This study demonstrates the use of the pseudo-random binary sequence (PRBS) to perform impedance spectroscopy in comparison to a single sinusoid injection. This is done to show the comparison between the two signals and to show the decrease in impedance estimation time brought about by PRBS in comparison to multi-sine signals. PRBS is a faster and easier technique to implement compared to the single-sine signals used in the condition monitoring of batteries. The tolerance of error brought by the implementation of impedance spectroscopy through PRBS and single-sine signals through a dc-dc converter is compared to the benchmarked theoretical results. This is demonstrated in simulation and experimentally. Results obtained from the Frequency Response Analyzer (FRA) are compared to the results obtained through a dc-dc converter using PRBS and Electrochemical Impedance Spectroscopy (EIS) as testing signals. Thereafter, this study demonstrates the feasibility and compares the use of the buck-boost and boost converters to perform impedance spectroscopy, and this is done by modelling and designing the converters for a linearized region of operation to accommodate different operating conditions of the fuel cell. This is achieved mainly using the double loop control strategy, which is rarely used in literature yet brings the benefits of controlling the power transfer and IS implementation. A practical buck-boost converter has discontinuous input current, more switching harmonics, and noise compared to the boost converter. As such, the contribution and influence of these factors are explored with regard to impedance estimation. The comparison of tolerance of error brought about by the implementation of impedance spectroscopy through PRBS and multi-sine signals using the boost and buck-boost converters are compared to the benchmarked theoretical results and Frequency Response Analyzer results. DA - 2023 DB - OpenUCT DP - University of Cape Town KW - Engineering LK - https://open.uct.ac.za PY - 2023 T1 - Broadband excitation of fuel cells for online condition monitoring using different switch-mode DC-DC mode topologies TI - Broadband excitation of fuel cells for online condition monitoring using different switch-mode DC-DC mode topologies UR - http://hdl.handle.net/11427/39614 ER - | en_ZA |
| dc.identifier.uri | http://hdl.handle.net/11427/39614 | |
| dc.identifier.vancouvercitation | Mahlangu S. Broadband excitation of fuel cells for online condition monitoring using different switch-mode DC-DC mode topologies. []. ,Faculty of Engineering and the Built Environment ,Department of Electrical Engineering, 2023 [cited yyyy month dd]. Available from: http://hdl.handle.net/11427/39614 | en_ZA |
| dc.language.rfc3066 | Eng | |
| dc.publisher.department | Department of Electrical Engineering | |
| dc.publisher.faculty | Faculty of Engineering and the Built Environment | |
| dc.subject | Engineering | |
| dc.title | Broadband excitation of fuel cells for online condition monitoring using different switch-mode DC-DC mode topologies | |
| dc.type | Thesis / Dissertation | |
| dc.type.qualificationlevel | Masters | |
| dc.type.qualificationlevel | MSc |