Browsing by Subject "Wireless Networks"

Now showing 1 - 5 of 5
  • Thumbnail Image
    Item
    Open Access
    Cross-layer RaCM design for vertically integrated wireless networks
    (2010) Pileggi, Paolo P; Kritzinger, Pieter S
    Wireless local and metropolitan area network (WLAN/WMAN) technologies, more specifically IEEE 802.11 (or wireless fidelity, WiFi) and IEEE 802.16 (or wireless interoperability for microwave access, WiMAX), are well-suited to enterprise networking since wireless offers the advantages of rapid deployment in places that are difficult to wire. However, these networking standards are relatively young with respect to their traditional mature high-speed low-latency fixed-line networking counterparts. It is more challenging for the network provider to supply the necessary quality of service (QoS) to support the variety of existing multimedia services over wireless technology. Wireless communication is also unreliable in nature, making the provisioning of agreed QoS even more challenging. Considering the advantages and disadvantages, wireless networks prove well-suited to connecting rural areas to the Internet or as a networking solution for areas that are difficult to wire. The focus of this study specifically pertains to IEEE 802.16 and the part it plays in an IEEE vertically integrated wireless Internet (WIN): IEEE 802.16 is a wireless broadband backhaul technology, capable of connecting local area networks (LANs), wireless or fixed-line, to the Internet via a high-speed fixed-line link.
  • Thumbnail Image
    Item
    Open Access
    Efficient radio resource management in next generation wireless networks
    (2017) Obayiuwana, Enoruwa; Falowo, Olabisi E
    The current decade has witnessed a phenomenal growth in mobile wireless communication networks and subscribers. In 2015, mobile wireless devices and connections were reported to have grown to about 7.9 billion, exceeding human population. The explosive growth in mobile wireless communication network subscribers has created a huge demand for wireless network capacity, ubiquitous wireless network coverage, and enhanced Quality of Service (QoS). These demands have led to several challenging problems for wireless communication networks operators and designers. The Next Generation Wireless Networks (NGWNs) will support high mobility communications, such as communication in high-speed rails. Mobile users in such high mobility environment demand reliable QoS, however, such users are plagued with a poor signal-tonoise ratio, due to the high vehicular penetration loss, increased transmission outage and handover information overhead, leading to poor QoS provisioning for the networks' mobile users. Providing a reliable QoS for high mobility users remains one of the unique challenges for NGWNs. The increased wireless network capacity and coverage of NGWNs means that mobile communication users at the cell-edge should have enhanced network performance. However, due to path loss (path attenuation), interference, and radio background noise, mobile communication users at the cell-edge can experience relatively poor transmission channel qualities and subsequently forced to transmit at a low bit transmission rate, even when the wireless communication networks can support high bit transmission rate. Furthermore, the NGWNs are envisioned to be Heterogeneous Wireless Networks (HWNs). The NGWNs are going to be the integration platform of diverse homogeneous wireless communication networks for a convergent wireless communication network. The HWNs support single and multiple calls (group calls), simultaneously. Decision making is an integral core of radio resource management. One crucial decision making in HWNs is network selection. Network selection addresses the problem of how to select the best available access network for a given network user connection. For the integrated platform of HWNs to be truly seamless and efficient, a robust and stable wireless access network selection algorithm is needed. To meet these challenges for the different mobile wireless communication network users, the NGWNs will have to provide a great leap in wireless network capacity, coverage, QoS, and radio resource utilization. Moving wireless communication networks (mobile hotspots) have been proposed as a solution to providing reliable QoS to high mobility users. In this thesis, an Adaptive Thinning Mobility Aware (ATMA) Call Admission Control (CAC) algorithm for improving the QoS and radio resource utilization of the mobile hotspot networks, which are of critical importance for communicating nodes in moving wireless networks is proposed. The performance of proposed ATMA CAC scheme is investigated and compare it with the traditional CAC scheme. The ATMA scheme exploits the mobility events in the highspeed mobility communication environment and the calls (new and handoff calls) generation pattern to enhance the QoS (new call blocking and handoff call dropping probabilities) of the mobile users. The numbers of new and handoff calls in wireless communication networks are dynamic random processes that can be effectively modeled by the Continuous Furthermore, the NGWNs are envisioned to be Heterogeneous Wireless Networks (HWNs). The NGWNs are going to be the integration platform of diverse homogeneous wireless communication networks for a convergent wireless communication network. The HWNs support single and multiple calls (group calls), simultaneously. Decision making is an integral core of radio resource management. One crucial decision making in HWNs is network selection. Network selection addresses the problem of how to select the best available access network for a given network user connection. For the integrated platform of HWNs to be truly seamless and efficient, a robust and stable wireless access network selection algorithm is needed. To meet these challenges for the different mobile wireless communication network users, the NGWNs will have to provide a great leap in wireless network capacity, coverage, QoS, and radio resource utilization. Moving wireless communication networks (mobile hotspots) have been proposed as a solution to providing reliable QoS to high mobility users. In this thesis, an Adaptive Thinning Mobility Aware (ATMA) Call Admission Control (CAC) algorithm for improving the QoS and radio resource utilization of the mobile hotspot networks, which are of critical importance for communicating nodes in moving wireless networks is proposed.
  • Thumbnail Image
    Item
    Open Access
    Enhancing PMIPv6 for Better Handover Performance among Heterogeneous Wireless Networks in a Micromobility Domain
    (Springer, 2010) Magagula, Linoh A; Falowo, Olabisi E; Chan, H Anthony
    This paper analyzes the reduction of handover delay in a network-based localized mobility management framework assisted by IEEE 802.21 MIH services. It compares the handover signaling procedures with host-based localized MIPv6 (HMIPv6), with network-based localized MIPv6 (PMIPv6), and with PMIPv6 assisted by IEEE 802.21 to show how much handover delay reduction can be achieved. Furthermore, the paper proposes and gives an in-depth analysis of PMIPv6 optimized with a handover coordinator (HC), which is a network-based entity, to further improve handover performance in terms of handover delay and packet loss while maintaining minimal signaling overhead in the air interface among converged heterogeneous wireless networks. Simulation and analytical results show that indeed handover delay and packet loss are reduced.
  • Thumbnail Image
    Item
    Open Access
    Performance evaluation of cross-layer energy-efficient transmit antenna selection for spatial multiplexing systems
    (2018) Okumu, Elizabeth Mukhwana; Dlodlo, Mqhele E
    Abstract Multiple-input multiple-output (MIMO) and cognitive radio (CR) are key techniques for present and future high-speed wireless technologies. On the other hand, there are rising energy costs and greenhouse emissions associated with the provision of high-speed wireless communications. Consequently, the design of high-speed energy efficient systems is paramount for next-generation wireless systems. This thesis studies energy-efficient antenna selection for spatial multiplexing multiple-antenna systems from a cross-layer perspective, contrary to the norm, where physical-layer energy efficiency metrics are optimized. The enhanced system performance achieved by cross-layer designs in wireless networks motivates this research. The aim of the thesis is to propose and analyze novel cross-layer energy-efficient transmit antenna selection schemes that enhance energy efficiency and system performance - with regard to throughput, transmission latency, packet error rate and receiver buffer requirements. Firstly, this thesis derives the analytical expression for data link throughput for point-to-point spatial multiplexing multiple-antenna systems - which include MIMO and underlay CR MIMO systems - equipped with linear receivers with N-process stop-and-wait (N-SAW) as the automatic repeat request (ARQ) protocol. The performance of cross-layer transmit antenna selection, which maximizes the derived throughput metric, is then analyzed. The impact of packet size, number of SAW processes and the stalling of packets inside the receiver reordering buffer is considered in the investigation. The results show that the cross-layer approach, which takes into account system characteristics at both the data link and physical layers, has superior performance in comparison with the conventional physical-layer approach, which optimizes capacity. Secondly, this thesis proposes a cross-layer energy efficiency metric, based on the derived system throughput. Energy-efficient transmit antenna selection for spatial multiplexing MIMO systems, which maximizes the proposed cross-layer energy efficiency metric, by jointly optimizing the transmit antenna subset and transmit power, subject to spectral efficiency and transmit power constraints, is then introduced and analyzed. Additionally, adaptive modulation is incorporated into the proposed cross-layer scheme to enhance system performance. Cross-layer energyefficient transmit antenna selection for underlay CR MIMO systems, where interference constraints now come into play, is then considered. Lastly, this thesis develops novel reduced complexity versions of the proposed cross-layer energyefficient transmit antenna selection schemes - along with detailed complexity analysis - which shows that the proposed cross-layer approach attains significant energy efficiency and performance gains at affordable computational complexity.
  • Thumbnail Image
    Item
    Open Access
    Virtualization of multicast services in WiMAX networks
    (2017) Mukanyiligira, Didacienne; Murgu, Alexandru
    Multicast service is one of the methods used to efficiently manage bandwidth when sending multimedia content. To improve bandwidth utilisation, virtualization is often invoked because of its additional features such as bandwidth sharing and support of services that require high volumes of transactional data. Currently, network providers are concerned with the bandwidth amount for efficient use of the limited wireless network capabilities and the provision of a better quality of service. The virtualization design of a multicast service framework should satisfy several objectives. For example, it should enable the interchange of service delivery between multiple networks with one shareable network infrastructure. Also, it should ensure efficient use of network resources and guarantee users' demands of Quality of Service (QoS). Thus, the design of virtualization of multicast service framework is a complex research study. Due to the bandwidth-related arguments, a strong focus has been put on technical issues that facilitate virtualization in wireless networks. A well-designed virtualized network guarantees users with the required quality service. Similarly, virtualization of multicast service is invoked to improve efficient utilisation of bandwidth in wireless networks. As wireless links prove to be unstable, packet loss is unavoidable when multicast service-oriented virtual artefacts are incorporated in wireless networks. In this thesis, a virtualized multicast framework was modelled by using Generalized Assignment Problem (GAP) methodology. Mixed Integer Linear Programing (MILP) was implemented in MATLAB to solve the GAP model. This was to optimise the allocation of multicast traffic to the appropriate virtual networks. Thus, the developed model allows users to have interchangeable services offered by multiple networks. Furthermore, Network Simulator version 3 (NS-3) was used to evaluate the performance of the virtualized multicast framework. Three applications, namely, voice over IP (VoIP), video streaming, and file download have been used to evaluate the performance of a multicast service virtualization framework in Worldwide Interoperability for Microwave Access (WiMAX) networks using NS-3. The performance evaluation was based on whether MILP is used or not used. The results of experimentation have revealed that there is good performance of virtual networks when multicast traffic is sent over one single virtual network instead of sending it over multiple virtual networks. Similarly, the results show that the bandwidth is efficiently used because the multicast traffic is not delivered through multiple virtual networks. Overall, the concepts, the investigations and the model presented in this thesis can enable mobile network providers to achieve efficient use of bandwidth and provide the necessary means to support services for QoS differentiations and guarantees. Also, the multicast service virtualization framework provides an excellent tool that can enable network providers to interchange services. The developed model can serve as a basis for further extension. Specifically, the extension of the model can boost load balancing in the flow allocation problem and activate a virtual network to deliver traffic. This may rely on the QoS policy between network providers. Therefore, the model should consider the number of users in order to guarantee improved QoS.