Real-time automatic machine inspection of plastic bottle closures

 

Show simple item record

dc.contributor.advisor De Jager, Gerhard en_ZA
dc.contributor.author Bartleet, Trevor Clive en_ZA
dc.date.accessioned 2014-11-15T19:35:48Z
dc.date.available 2014-11-15T19:35:48Z
dc.date.issued 1995 en_ZA
dc.identifier.citation Bartleet, T. 1995. Real-time automatic machine inspection of plastic bottle closures. University of Cape Town. en_ZA
dc.identifier.uri http://hdl.handle.net/11427/9643
dc.description Bibliography: leaves 89-91. en_ZA
dc.description.abstract This thesis presents work done developing an automatic system for plastic bottle closures. These plastic closures ae manufactured at 20 per second and the inspection must be done in real-time at this rate. Two types of defects must be detected and the defective closures removed from the production line. Inspection by human operators proved to be unreliable and subjective, and an automatic inspection system was needed. A machine vision system is capable of producing reliable and repeatable results in an environment which is unpleasant to humans. An automatic inspection system was implemented on the production line. The development of this system is divided into three sections. en_ZA
dc.language.iso eng en_ZA
dc.subject.other Electrical Engineering en_ZA
dc.title Real-time automatic machine inspection of plastic bottle closures en_ZA
dc.type Thesis / Dissertation en_ZA
uct.type.publication Research en_ZA
uct.type.resource Thesis en_ZA
dc.publisher.institution University of Cape Town
dc.publisher.faculty Faculty of Engineering & the Built Environment en_ZA
dc.publisher.department Department of Electrical Engineering en_ZA
dc.type.qualificationlevel Masters en_ZA
dc.type.qualificationname MSc en_ZA
uct.type.filetype Text
uct.type.filetype Image


Files in this item

This item appears in the following Collection(s)

Show simple item record