Investigation of the hot deformation of sintered titanium compacts produced from direct reduction powder

 

Show simple item record

dc.contributor.advisor Knutsen, Robert D en_ZA
dc.contributor.advisor Lang, Candy en_ZA
dc.contributor.author Petersen, Shaheeda en_ZA
dc.date.accessioned 2015-01-08T19:45:30Z
dc.date.available 2015-01-08T19:45:30Z
dc.date.issued 2010 en_ZA
dc.identifier.citation Petersen, S. 2010. Investigation of the hot deformation of sintered titanium compacts produced from direct reduction powder. University of Cape Town. en_ZA
dc.identifier.uri http://hdl.handle.net/11427/11748
dc.description Includes bibliographical references (leaves 110-111). en_ZA
dc.description.abstract The focus of this study was the use of powder metallurgy to produce low cost titanium with comparative mechanical properties to wrought titanium. The objectives of this investigation was to produce sintered titanium compacts that represented metal made by the Direct Powder Rolling method. The critical strain (ɛC) required to induce recrystallization following deformation was determined by hot compressing wrought titanium samples. Finally sintered titanium samples were hot compressed at ɛC and the changes to the microstructure, porosity and mechanical properties was assessed. en_ZA
dc.language.iso eng en_ZA
dc.subject.other Materials Engineering en_ZA
dc.title Investigation of the hot deformation of sintered titanium compacts produced from direct reduction powder en_ZA
dc.type Thesis / Dissertation en_ZA
uct.type.publication Research en_ZA
uct.type.resource Thesis en_ZA
dc.publisher.institution University of Cape Town
dc.publisher.faculty Faculty of Engineering & the Built Environment en_ZA
dc.publisher.department Centre for Materials Engineering en_ZA
dc.type.qualificationlevel Masters en_ZA
dc.type.qualificationname MSc en_ZA
uct.type.filetype Text
uct.type.filetype Image


Files in this item

This item appears in the following Collection(s)

Show simple item record