Browsing by Subject "Mineral bioleaching"

Now showing 1 - 3 of 3
  • Thumbnail Image
    Item
    Restricted
    Microbial colonisation in heaps for mineral bioleaching and the influence of irrigation rate
    (Elsevier, 2012) Chiume, R; Minnaar, S H; Ngoma, I E; Bryan, C G; Harrison, S T L
    Microbial colonisation is important for mineral dissolution in heap bioleaching of low grade ore. Colonisation studies to date have focused on the microbial attachment of single species to mineral concentrates in batch and flow systems. Hydrology and soil engineering studies suggest interaction between microbial colonisation and fluid flow in porous systems that result from solution-ore and microbe-mineral contacting (Wan et al., 1994 and Yarwood et al., 2006). The effect of the irrigation rate on microbial colonisation was assessed using columns packed with acid agglomerated low grade copper-containing ore. Continuous flow, unsaturated, aerated bed reactors were inoculated by pulse irrigation with iron and sulphur oxidising mesophilic microorganisms (1012 cells/ton ore), followed by operation at irrigation rates of 2, 6 and 18 l/m2/h. A novel in-bed sampling technique allowed the extraction of ore samples from the bed during the leaching process. Novel insights regarding microbial growth, interstitial and weakly and strongly attached microbial populations were obtained. Bacterial adherence and cell number retained in the ore bed increased over the 32 day leaching period. Average specific growth rates of ore-associated micro-organisms of 0.161 ± 0.0045, 0.155 ± 0.026 and 0.120 (± 0.00) 1/h were obtained at 2, 6 and 18 L/m2/h respectively. Faster colonisation occurred at lower irrigation rates. At higher irrigation rates, higher detachment and cell removal were apparent, based on PLS cell numbers. The interstitial cells from the stagnant fluid in the ore bed formed the dominant contribution to the microbial population within all the heap systems.
  • Thumbnail Image
    Item
    Restricted
    Reactive oxygen species generated in the presence of fine pyrite particles and its implication in thermophilic mineral bioleaching
    (Springer Verlag, 2012) Jones, G C; van Hille, R P; Harrison, S T L
    In the tank bioleaching process, maximising solid loading and mineral availability, the latter through decreasing particle size, are key to maximising metal extraction. In this study, the effect of particle size distribution on bioleaching performance and microbial growth was studied through applying knowledge based on medical geology research to understand the adverse effects of suspended fine pyrite particles. Small-scale leaching studies, using pyrite concentrate fractions (106–75, 75–25, −25 μm fines), were used to confirm decreasing performance with decreasing particle size (D50 <40 μm). Under equivalent experimental conditions, the generation of the reactive oxygen species (ROS), hydrogen peroxide and hydroxyl radicals from pyrite was illustrated. ROS generation measured from the different pyrite fractions was found to increase with increasing pyrite surface area loading (1.79–74.01 m2 L−1) and Fe2+ concentration (0.1–2.8 g L−1) in solution. The highest concentration of ROS was measured from the finest fraction of pyrite (0.85 mM) and from the largest concentration of Fe2+ (0.78 mM). No ROS was detected from solutions containing only Fe3+ under the same conditions tested. The potential of ROS to inhibit microbial performance under bioleaching conditions was demonstrated. Pyrite-free Sulfolobus metallicus cultures challenged with hydrogen peroxide (0.5–2.5 mM) showed significant decrease in both cell growth and Fe2+ oxidation rates within the concentration range 1.5–2.5 mM. In combination, the results from this study suggest that conditions of large pyrite surface area loading, coupled with high concentrations of dissolved Fe2+, can lead to the generation of ROS, resulting in oxidative stress of the microorganisms.
  • Thumbnail Image
    Item
    Restricted
    Reactive oxygen species generated in the presence of fine pyrite particles and its implication in thermophilic mineral bioleaching.
    (Springer Verlag, 2013) Jones, G C; van Hille, R P; Harrison, S T L
    In the tank bioleaching process, maximising solid loading and mineral availability, the latter through decreasing particle size, are key to maximising metal extraction. In this study, the effect of particle size distribution on bioleaching performance and microbial growth was studied through applying knowledge based on medical geology research to understand the adverse effects of suspended fine pyrite particles. Small-scale leaching studies, using pyrite concentrate fractions (106–75, 75–25, −25 μm fines), were used to confirm decreasing performance with decreasing particle size (D 50 <40 μm). Under equivalent experimental conditions, the generation of the reactive oxygen species (ROS), hydrogen peroxide and hydroxyl radicals from pyrite was illustrated. ROS generation measured from the different pyrite fractions was found to increase with increasing pyrite surface area loading (1.79–74.01 m2 L−1) and Fe2+ concentration (0.1–2.8 g L−1) in solution. The highest concentration of ROS was measured from the finest fraction of pyrite (0.85 mM) and from the largest concentration of Fe2+ (0.78 mM). No ROS was detected from solutions containing only Fe3+ under the same conditions tested. The potential of ROS to inhibit microbial performance under bioleaching conditions was demonstrated. Pyrite-free Sulfolobus metallicus cultures challenged with hydrogen peroxide (0.5–2.5 mM) showed significant decrease in both cell growth and Fe2+ oxidation rates within the concentration range 1.5–2.5 mM. In combination, the results from this study suggest that conditions of large pyrite surface area loading, coupled with high concentrations of dissolved Fe2+, can lead to the generation of ROS, resulting in oxidative stress of the microorganisms.