Browsing by Author "Rose, P D"

Now showing 1 - 2 of 2
  • Thumbnail Image
    Item
    Restricted
    A continuous process for the biological treatment of heavy metal contaminated acid mine water
    (Elsevier, 1999) van Hille, R P; Boshoff, G A; Rose, P D; Duncan J R
    Alkaline precipitation of heavy metals from acidic water streams is a popular and long standing treatment process. While this process is efficient it requires the continuous addition of an alkaline material, such as lime. In the long term or when treating large volumes of effluent this process becomes expensive, with costs in the mining sector routinely exceeding millions of rands annually. The process described below utilises alkalinity generated by the alga Spirulina sp., in a continuous system to precipitate heavy metals. The design of the system separates the algal component from the metal containing stream to overcome metal toxicity. The primary treatment process consistently removed over 99% of the iron (98.9 mg/l) and between 80 and 95% of the zinc (7.16 mg/l) and lead (2.35 mg/l) over a 14-day period (20 l effluent treated). In addition the pH of the raw effluent was increased from 1.8 to over 7 in the post-treatment stream. Secondary treatment and polishing steps depend on the nature of the effluent treated. In the case of the high sulphate effluent the treated stream was passed into an anaerobic digester at a rate of 4 l/day. The combination of the primary and secondary treatments effected a removal of over 95% of all metals tested for as well as a 90% reduction in the sulphate load. The running cost of such a process would be low as the salinity and nutrient requirements for the algal culture could be provided by using tannery effluent or a combination of saline water and sewage. This would have the additional benefit of treating either a tannery or sewage effluent as part of an integrated process.
  • Thumbnail Image
    Item
    Restricted
    An integrated algal sulphate reducing high rate ponding process for the treatment of acid mine drainage wastewaters
    (Springer, 1998) Rose, P D; Boshoff, G A; van Hille, R P; Wallace, L C M; Dunn, K M; Duncan, J R
    Acid mine drainage pollution may be associated with large water volume flows and exceptionally long periods of time over which the drainage may require treatment. While the use and role of sulphate reducing bacteria has been demonstrated in active treatment systems for acid mine drainage remediation, reactor size requirement and the cost and availability of the carbon and electron donor source are factors which constrain process development. Little attention has focussed on the use of waste stabilisation ponding processes for acid mine drainage treatment. Wastewater ponding is a mature technology for the treatment of large water volumes and its use as a basis for appropriate reactor design for acid mine drainage treatment is described including high rates of sulphate reduction and the precipitation of metal sulphides. Together with the co-disposal of organic wastes, algal biomass is generated as an independent carbon source for SRB production. Treatment of tannery effluent in a custom-designed high rate algal ponding process, and its use as a carbon source in the generation and precipitation of metal sulphides, has been demonstrated through piloting to the implementation of a full-scale process.The treatment of both mine drainage and zinc refinery wastewaters are reported. A complementary role for microalgal production in the generation of alkalinity and bioadsorptive removal of metals has been utilised and an Integrated ‘Algal Sulphate Reducing Ponding Process for the Treatment of Acidic and Metal Wastewaters’ (ASPAM) has been described.